Filter
Top Products
16 308655J
Dimensions
1/2-in.
npt air
inlet
3/4-in.
npt
muffler
port
Model
205626
25.8 in.
(655 mm)
MODEL 205626, Series K
3/4-in.
npt fluid
outlet
18.4 in.
(467 mm)
7.4 in.
(188 mm)
Model
222065
32.3 in.
(820 mm)
Model
222095
36.6 in.
(929 mm)
Note: For
sealed tank
mounting use
gasket
192658.
06035
Mounting Hole
Layout
2.25-in. (57.2 mm) diameter
clearance hole
45_
Four 0.406-in. (10.3
mm) holes on 7-in.
(177.8 mm) bolt
circle
8.0 in.
(203.2 mm)
diameter of
flange
Four threaded
holes on bottom of
air motor base are
1/4–20 UNC on
4.25-in. (108 mm)
bolt circle.
Technical Data
Maximum working pressure 1800 psi (124 bar). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid pressure ratio 10:1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Air operating range 40 to 180 psi (2.8 to 12.4 bar). . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Air consumption Approximately 13 ft
3
/min per gallon pumped,. . . . . . . . . . . . . . . . . .
(6 m
3
/hour per liter pumped)
at 100 psi (6.9 bar)
Pump cycles per gallon (liter) 20 (5.3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum recommended continuous pump speed 60 cycles/min;. . . . . . . . . . . . . . .
3 gpm (11.4 liter/min)
Recommended speed for optimum pump life 15 to 25 cycles per min. . . . . . . . . . . .
Sound data 78.0 dBA sound power at 100 psi air, 40 cycles per minute. . . . . . . . . . .
Piston seals polyurethane with nitrile spreader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rod seals polyurethane with nitrile spreader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wetted parts aluminum, steel, polyurethane, nitrile. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight (Model 205626, Universal Pump) 28.7 lb (13.0 kg). . . . . . . . . . . . . . . . . . . . . .
Loctiter is a registered trademark of the Loctite Corporation.