Filter
Top Products
Parts
16 3A0019J
60cc, 65cc, 75cc, 80cc, 86cc, 100cc, 120cc, and 160cc Pumps
1. Lubricate seals, o-rings, lead-in’s and moving parts with
grease.
Apply one stripe of removable strength anaerobic sealant on
threads.
Torque to 50-ft-lbs (67.5 N•m).
Torque evenly to 50-200 ft-lbs (60-270 N•m), all to the same
torque value.
Fully tighten with a wrench.
See table on page 11 for torque specification.
Must be pressed straight into housing.
Apply anti-seize lubricant to threads.
Ensure u-cup (17) springs face throat cartridge (18).
Ensure u-cup (17) springs face displacement rod (15).
Fully assemble seal (17) and bearing (16) onto displacement
rod (15) before tightening piston retainer (14).
NOTICE
Specification sheets and Graco testing indicate that anaer-
obic sealant requires three days to fully cure. Failure to
allow three days for full cure may result in parts coming
loose during operation.
If faster cure time is needed,
Rapid Sealant Cure Kit is available, 24N985.
2
3
5
6
7
8
9
10
11
12
11
10
8
9
8
12
12
11
10
9
8
6
8
13
16
14
17
15
5
1
1
3
4
2
2
7
20
18
16
19
17
3
5
96
8
9
7
9
6
12
10
2
11
r_257893_3a0019_21h
12
34
35