Filter
Top Products
Instructions–Parts List
307619ZAA
ENG
HYDRA–SPRAY
R
Monarkr and Presidentr
Pumps
For airless and air–assisted spraying of finishing materials.
For professional use only.
Important Safety Instructions
Read all warnings and instructions in this manual. Save
these instructions.
See page 2 for Table of Contents
Part No. 223596, Series B 23:1 Ratio Monarkr Pump
with Part No. 223595 carbon steel severe–duty displacement pump*
with stainless steel glands, intake housing, piston valve, and ball stop
2760 psi (19 MPa, 190 bar) Maximum Fluid Working Pressure
120 psi (0.8 MPa, 8 bar) Maximum Air Input Pressure
Part No. 237958, Series B 23:1 Ratio Monarkr Pump
with Part No. 239145 stainless steel
severe–duty displacement pump*
3450 psi (24 MPa, 238 bar) Maximum Fluid Working Pressure
150 psi (1.0 MPa, 10.4 bar) Maximum Air Input Pressure
Part No. 239140, Series A 46:1 Ratio Presidentr Pump
with Part No. 239145 stainless steel
severe–duty displacement pump*
4600 psi (32 MPa, 317 bar) Maximum Fluid Working Pressure
100 psi (0.7 MPa, 7 bar) Maximum Air Input Pressure
* Severe–duty displacement pumps have abrasion–resistant
displacement rods and sleeves. Refer to Technical Data on
page 20 for information on the wetted parts.
Model 239140
06936
Model 223596
02097
II 1/2 G T3
ITS03ATEX11228
II 1/2 G T3
ITS03ATEX11228
II 2 G T6