Filter
Top Products
©2010 The Genie Company 01/27/2010
15
3. Press the same button
twice to toggle IntelliCode®
selection from IntelliCode® 2
to IntelliCode® 1.
INTELLICODE® FEATURES
Earlier models of Genie® garage door openers,
remotes, and wireless keypads use IntelliCode®
1 signals to communicate. Remote(s) provided
with this unit will transmit either IntelliCode® 1 or
IntelliCode® 2 signals.
Remote(s) contained in this package are preset
to IntelliCode® 2 and can be configured to
communicate with previously installed IntelliCode®
1 openers. This dual IntelliCode® option allows one
IntelliCode® 2 remote to operate BOTH new and
current models of The Genie Company garage door
openers.
This new Genie® garage door opener will ONLY
accept signals from a remote sending IntelliCode® 2
signals or a Genie® brand IntelliCode® 1 remote that
has been programmed to the opener using a new
IntelliCode® 2 remote.
NOTE: Other remotes not enabled with Genie®
IntelliCode® 2 will not operate this opener.
If you have garage door
openers*
Best choice of
IntelliCode®
programming
One or more IntelliCode® 2
openers.
Maximum 3 different openers
Use IntelliCode® 2
Mixture of openers
manufactured between 1997
and 2010 (IntelliCode® 1) and
new IntelliCode® 2 openers
Use IntelliCode® 2
and/or 1
One or more openers
manufactured between 1997
and 2010 (IntelliCode® 1)
Use IntelliCode® 1
* Maximum 3 different openers per each 3 button
remote.
Programming to previously installed Series II
(IntelliCode® 1) Genie® garage door openers
Remote(s) provided with this unit can operate
earlier (Series II) models of Genie® garage door
openers. The default Series III (IntelliCode® 2)
frequency must be changed to IntelliCode® 1.
(Follow these same steps to change IntelliCode® 1
back to IntelliCode® 2 frequency.)
The LED color displayed on the remote indicates
the IntelliCode® transmitting mode.
Red = IntelliCode® 1 / Green = IntelliCode® 2
1. Select a button on the remote that has NOT been
programmed to the new power head.
2. Press and hold that button for 10 seconds.
Both Red and Green
LEDs come ON and stay
ON.
10 SECS
4. Press the same button again
to confirm toggle. The
IntelliCode® selection for this
button is set to IntelliCode® 1.
5. Take the remote to the earlier Genie® garage
door opener and follow that opener's instructions
to program a new remote.
Repeat for other Genie® garage remote(s) as
necessary.
Red LED Green LED
Three button
remote