Filter
Top Products
10
Drill a 1¾ inch hole and feed the conduit
through the hole.
Remove the knockout in the back of the
connection box, feed the wires through the
back of the box and secure the conduit with
the lock nut.
Seal the hole with silicone caulk. Don’t forget
to caulk the hole inside the house as well.
Mount the connection box so that it completely
covers the hole in the wall.
Connect all wires to the lugs in the connec
tion
box (black to black, red to red and white to
white). Attach the green ground wire to the
ground screw and connect the two ends of the
four-pin plug connector.
Replace the protective cover plate …
… and lock the connection box.
External Electrical Connections