Filter
Top Products
Protecting Yourself While at Home
1
Before armin
g
your system, make sure the
g
reen
Status
li
g
ht is ON. This indicates that all of your protective zones are
secure. If any zones are open, the correspondin
g
zone number will be lit. Secure those zones before proceedin
g
.
2
Enter your User Code and press
.
The
g
reen
Status
li
g
ht will
g
o out, and the red
Armed
li
g
ht will li
g
ht.
3
Before your exit delay expires, press
to bypass any interior zones, deactivatin
g
devices such as motion sensors,
and allowin
g
free movement throu
g
hout the premises. The Zone li
g
ht of any bypassed zones will flash slowly.
Your system may have been programmed for Automatic Interior Bypass , in which case it will recognize that you have
not left the premises and will automatically bypass any interior zones.
Instant Mode
Pressing will cancel the Entry delay , activating the “Instant” mode. This is typically done in the evening when all family
members are home for the night. Instant Mode can be activated at any time after the system has been armed. The red
Armed
light will flash rapidly while in the Instant Mode.
Easy Exit
(optional)
Your System may have been programmed to allow Easy Exit, which allows a user to exit the premises with the system armed.
By pressing
followed by , the protection is removed from the Exit/ Entry zone for 3 minutes.
This will allow, for example, an early morning commuter to exit the house in the morning, without having to disarm and rearm the
system, waking the family.
Arming with a System Trouble Present
(TROUBLE
is lit)
If the GEM-P800 has a system trouble present, TROUBLE will be lit and the keypad sounder pulsin
g
. If you cannot
immediately clear the trouble, the system can still be armed. Simply press
followed by to view the trouble.
Press
to view any other troubles, and exit the TROUBLE mode when done. Enter your User Code and press
to arm
the system. For more information, refer to pa
g
e 12. Note: System troubles should be repaired as soon as possible.
Arming Your System
6
Oi219c
page 6
Tuesday, September 16, 1997 08:24