Filter
Top Products
DEVICE SETUP
Toolkit group - Device Setup
Introduction to Device Setup
The Device Setup tool is used to add/edit/modify GE IEDs. The maximum number of devices that can
be configured is 100. Upon accessing the Device Setup screen from the EnerVista PMCS Configurator
main menu, the following screen will pop up, showing sites (Ethernet and Serial) or devices that you
have previously set up:
To save your changes before exiting back to the main menu, click on the [OK] button. To exit back to
the main menu without saving your changes, click on the [CANCEL] button.
Add Device – For adding devices to the system
Site Name – 2 fixed names and is either “Ethernet” or “Serial”
“Ethernet” – reserved for devices using Modbus TCP/IP over Ethernet, fiber, etc. Examples are
devices with a Modbus TCP/IP option such as the UR, EPM 9650, or serial devices using a
Modbus TCP/RTU bridge, such as the Multilin Multinet.
7