Filter
Top Products
Introduction
Welcome to the Enervista PMCS 6.15 Quick start Guide. The intent of this guide is to quickly walk a
user through the basic configuration and operation steps in order to view data from a GE Multilin
device. It is not intended to illustrate or explain advanced features and configurations such as adding
generic Modbus devices or creating/using custom one-line screens/wizards. Questions of this nature
should be addressed in the Enervista PMCS 6.15 documentation found in the CD/Tech_Doc/GE_CD.
By the end of the guide a user should be able to do the following
• Add a GE Multilin Modbus RTU/TCP/IP device to PMCS 6.15.
• View device generated Events/Alarms from the device
• View waveforms from the device (if supported by device)
Below is a simple system combining all the base elements of a PMCS 6.15 system comprised of the
following elements: Modbus RTU and Modbus TCP/IP devices, Multinet Gateway, Multilink Ethernet
switch and the host PC running Enervista PMCS.
System Requirements
Minimum system requirements:
1 GHz processor
512 MB RAM
Video capable of displaying 16-bit, 1024x768 resolution
700 Mb of available space required on system drive, 40GB of available space required on
installation drive
Internet Explorer 5.5 with Service Pack 1 or greater
Windows 2000 SP4, Windows XP SP2 or Windows 2003 Server R2
IIS Installed (on PMCS Server for Remote Viewing capabilities)
3