Filter
Top Products
7
Flush Procedure
Whenever water of unknown quality is passed through the GE Water Filtration system, filter elements
should be discarded and the filtration system flushed.
Circumstances that may require flushing the system are:
■ Boil-water advisory.
■ Flooding of the GE Water Filtration system.
■ Long-term non-use.
The procedure for flushing the GE Water Filtration system is:
See
Filter Cartridge Replacement
section and follow steps 1, 2, 3, and 4.
Next, reinstall the sumps (without the filter elements), turn water on, and flush water through the
faucet for one minute.
Then, turn water off, remove sumps, empty water out of sumps and install new filter elements.
Follow steps 6–9 in the
Filter Cartridge Replacement
section to complete.
4
3
2
1
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Instructions Installation Instructions