Filter
Top Products
FTP-1000
Installation Manual
8
Changing chime and trouble beep tones
The frequency (pitch) of chime and trouble beep tones from each touchpad can be adjusted to a more desirable
or distinct tone, and to compensate for hearing impaired persons.
Note: Chime and trouble beep tones sound (using the default frequency) during, or within 15 seconds of any button activity at
that specific touchpad.
Change status tone pitch
To change the status tone pitch, do the following:
1. Press and hold the * and 0 buttons together until you hear a steady tone, then release the buttons.
2. Press and hold 1 to lower the pitch or press and hold 2 to raise the pitch.
3. Release the button when the desired pitch is heard. After about 15 seconds of no touchpad activity, the
steady tone stops sounding.