Filter
Top Products
Use GE
For: Description:
Kit Number:
RAK56A100 GE RAB13, 14 & 15 Fits all GE wall cases 26²W ´ 18²H ´ 24²D
(ACLB & RCL Chassis)
RAK107 Hotpoint ACXB10 & 11 Adapts an older Hotpoint wall case to a “J” model chassis.
(ACTB Chassis) Fits Hotpoint wall cases 25
3
¤
4
²W ´ 16
7
¤
8
²H ´ 18
5
¤
8
²D
RAK108 Whirlpool Type 23W Adapts Whirlpool wall case to a “J” model chassis.
Wall Case Fits Whirlpool wall cases 25
7
¤
8
²W ´ 16
1
¤
2
²H ´ 23
1
¤
8
²D
RAK110 GE RAB30 Adapts GE wall case to a “J” model chassis.
(“F” models) Fits the RAB 30 wall case 26²W ´ 18²H ´ 24²D
RAK123 Fedders Wall Case “A” Adapts Fedders wall case to a “J” model chassis.
Fits Fedders wall cases 27²W ´ 16
3
¤
4
²H ´ 16
3
¤
4
²D
RAK126 Westinghouse Wall Case Adapts Westinghouse wall case to a “J” model chassis.
(Type 2626D73H01) Fits Westinghouse wall cases 25
7
¤
8
²W ´ 15
7
¤
16
²H ´ 16²D
RAB46, 47 & 48 Use these kits for all Standard wall case for “J” model chassis.
other brands not listed. RAG13 stamped aluminum exterior grille included.
Remove the existing case and replace.
RAK690 RAB36, 37, 38, 46, 47 or 48 If you attach a custom architectural outdoor grille,
(J-Chassis) use this kit to ensure proper airflow.
RAG14E RAB36, 37, 38, 46, 47 or 48 Architectural louvered exterior grille
(J-Chassis)
Installing a J-Model in an Existing Wall Case
9
J-model air conditioners may fit in existing wall
cases. However, they often need a kit to properly
adapt the case to the GE air conditioner. Answer
these questions and see the chart below for the
proper kit.
1 What brand air conditioner will you be replacing?
2 What are the dimensions of the wall case
currently in use?
3 What is the model number of the chassis currently
in use? What is the model (or Type) number of the
wall case currently in use?
Frequently, the J-model adapter kit will apply to
another brand model “series” or specific vin-
tage. In these cases, you need the chassis model
number and/or the wall case or “type” number
to confirm the use of the correct adapter kit.
4 What type of outdoor grille is used with the cur-
rent wall case?
There may be an architectural grille attached
to a wall case to enhance the exterior appear-
ance of the building. Custom grilles may be
used with J-model wall cases provided a J-model
adapter kit is also used to ensure proper
airflow.
IMPORTANT!
GE strongly recommends the removal of the
old wall case and the installation of a new
GE Wall Case. If you decide to keep the exist-
ing wall case, you may need a kit to ensure
proper performance. If you DO NOT use a kit,
you run the risk of poor performance or
product failure. This is not covered under
the terms of the GE warranty.
J-Model Qualifying Questions