Filter
Top Products
12
Consumer Support Troubleshooting Tips
Operating Instructions Safety InstructionsInstallation Instructions
Install the Window Locking Bracket and the Foam Top Window Gasket
Attach the window locking bracket with
a type C screw.
Cut the foam top window gasket to the
window width.
Stuff the foam between the glass and the
window to prevent air and insects from
getting into the room.
C
BA
Window installation instructions.
6
Install the Air Conditioner in the Case
Slide the air conditioner into the case.
Reinstall the 2 screws removed earlier on
each side of the case.
Before installing the front grille, pull out
the vent control lever located above the unit
control knobs, as shown.
Attach the front grille to the case by inserting
the tabs on the grille into the slots on the front
of the case. Push the grille in until it snaps
into place.
Lift the inlet grille and secure the front frame
with a type A screw. Lower the inlet grille
into place.
D
C
B
A
7
Guide the lever carefully
through the grille as you
push it in.