GE AGE12 Air Conditioner User Manual


 
10
Consumer Support Troubleshooting Tips
Operating Instructions Safety InstructionsInstallation Instructions
Remove the Air Conditioner From the Case
Remove the 2 shipping screws from the back
of the case.
Remove the 2 screws on each side of the case.
Keep these for later use.
Slide the air conditioner from the case by
gripping the base pan handle and pulling
forward while bracing the case.
C
B
A
Window installation instructions.
3
Shipping screws
Prepare the Window and the Case
Cut the window sash seal to the proper length.
Peel off the backing and attach the seal to the
underside of the window sash.
Carefully insert the plastic frame guides into
the bottom of the case on each side.
Remove the backing from the top mounting
rail seal strip and attach the seal to the bottom
of the top mounting rail.
Install the top mounting rail with 3 type A
screws on the inside of the case. Insert the
frames for the accordion panels into the top
mounting rail and the frame guides. Attach
the accordion panels to the side of the case
using 4 type A screws on each side.
D
C
B
A
4
Bottom
of case
Frame
guide
Top mounting rail
Frame guides