Filter
Top Products
Bag Cover
5
How To Assemble
CAUTION: Assemble the cleaner completely before plugging into an electrical outlet.
CAUTION: Moving parts, stay clear of brush roll when plugging in.
NOTE: Features may vary by model yet all parts assemble the same.
Step A Remove Bag Cover
1. Remove bag cover from unit to expose the two
screw installation locations. Release the bag cover
by rotating the bag cover latch to the left. Pull out
and up on the bag cover handle to remove bag
cover from unit.
##
##
#
Bag
Cover
Latch
Step B Attach Handle
2. Position handle as above. Slide the handle down
over the top of the unit, inserting handle tabs into
slots on unit.
3. Find the two screws in the accessory bag included
in the carton. To secure the handle on the unit,
install the two screws.
Bag Cover
Handle
Handle
Tabs
Slots
Screw
Screw
Two Screw Locations