Filter
Top Products
Micron Filter
Inspect the micron filter periodically and change
as needed. For maximum efficiency, replace the
micron filter periodically.
To Replace Micron Filter
1. Lift up and pull out on micron filter door to
remove.
2. Grasp filter frame and pull out.
3. Remove micron filter from filter frame.
4. Push new micron filter into filter frame, coarse
side facing out.
5. Replace filter frame assembly with new filter back
into cleaner.
6. To close, place micron filter door at top of
opening pressing against unit, slide down into
place.
14
Micron
Filter
Door
Micron
Filter
How To Change Light Bulb
CAUTION: Turn off the power switch and
unplug the electrical cord before
changing light bulb.
1. Lower handle to remove two screws from lens
cover.
2. Pull lens cover from cleaner.
3. Support socket with one hand and pull light
bulb straight out to release.
4. Place new light bulb into socket; push to
secure.
5. Push light bulb and socket back so
bulb will not touch lens cover.
6. Replace lens cover.
7. Secure with two screws.
Use replacement micron filter supplied with GE-1 bags.
Use GE brand replacement light bulb, 61444-1
Filter
Frame
Lens
Cover