Filter
Top Products
Installation instructions.
Customer Service Troubleshooting Tips
Installation Instructions
Safety InstructionsCustomer Service Troubleshooting Tips
Operating Instructions
Safety InstructionsCustomer Service Troubleshooting Tips Safety Instructions
Typical Installation Illustration
Fig 1.
Optional 3-Valve Bypass Installation Illustration
Fig 2.
6
Adapters for this installation are not supplied with the softener. To order these adapters, call
GE Parts 800.626.2000.
Soft water
Hard water to
outside faucets
MAIN WATER PIPE
Hard water
Installation nut (2)
Copper tube, 3/4″ (2)
Washer (2)
Bypass Valve
• Pull out for service
• Push in for bypass
NOTE:
Threads on the bypass
valve are 1″ male pipe. If 1″
pipes are needed, do not use the
copper tubes and nuts included.
Buy adapters and plumb directly
to the 1″ threads.
INLET
Brinewell
NOTE:
See
Drain Hose
Connections
section.
SALT
GOES HERE
Salt hole
cover
removed
24V transformer
120-volt outlet
Hard water
Soft water
From softener outlet
To softener inlet
CROSS-OVER
Use if water supply flows from the left.
Include single or 3-valve bypass.
Hard water
Soft water
From softener outlet
To softener inlet
CROSS-OVER
Use if water supply flows from the left.
Include single or 3-valve bypass.
MAIN WATER PIPE
Soft water
Hard water
Copper tube, 3/4″ (2)
Washer (2)
Installation adapter (2)
INLET
NOTE:
Threads on the installation adapters are 1″ male pipe.
If 1″ pipes are needed, do not use the copper tubes and nuts
included. Buy adapters and plumb directly to the 1″ threads.
24V transformer
120-volt outlet
Bypass valve
Hard water to outside faucets
Inlet valve
Outlet valve
Nut (2)
3-valve bypass system
For soft water service:
• Open the inlet and outlet valves
• Close the bypass valve
For bypass hard water:
• Close the inlet and outlet valves
• Open the bypass valve