GE 2010 Air Conditioner User Manual


 
9
RAK40 (AZ Series*)
Air Deflector Kit
KitadaptsAZchassisforusewitholderGEarchitecturalgrilles.The
aluminum deflectors are installed to the condenser end sheet flanges
topreventcondenserairflowrecirculation.Thekitalsoallowssome
custom (non-standard) rear grilles to be used, provided they have
sufficient open area.
Zoneline units
RAK601/602 (AZC and AZ Series*—2100, 2200, 2500,
2800, 2900, 3100, 3200, 3500, 3800, 3900, 4100 and
6100 only)
Duct Extension, Register and Trim Flange
RAK601isa44"-longductandincludesanairregisterandtrimflange
forthesecondaryspace.IftwoextensionsaremadefromoneRAK601
duct, an additional air register and trim flange can be ordered
separately as an RAK602, reducing the cost of the installation. For use
with RAK605 and RAK6052.
* A-B Series: Zoneline units built before 1987 – Zoneline I, II, III, and IV; AZC Series: Zoneline units built from 1987 to 1992 – includes AZR Series – Zoneline 1000, 2000, 2500, 2700, 3000,
4000, 5000; AZ Series: Zoneline units built after 1992 – Zoneline 2100, 3100, 2600, 5100 / Zoneline 2200, 3200, 5200 / Zoneline 2500, 3500, 5500 / Zoneline 2800, 2900, 3800, 3900, 4100,
5800, 6100, 7500, 8500.
RAK605 (AZ Series*—2100 and 3100 only)
Duct Adapter
(Not for 2600 and 5100 Series)
TheRAK605ductadapterisattachedtothetopofthewallcaseto
allow the air from the Zoneline unit to heat or cool an adjacent room.
DuctextensionRAK601canbeappliedtorightorleftoftheadapter.
(Zoneline 2600 and 5100 Series not approved for ducted application).
7-3/32"
6-1/2"
RAK6052 (AZ Series*—2200, 2500, 2800, 2900, 3200,
3500, 3800, 3900, 4100 and 6100 only)
Duct Adapter
(Not for 5200, 5500 or 5800 Series)
TheRAK6052ductadapterisattachedtothetopofthewallcase
to allow the air from the Zoneline unit to heat or cool an adjacent
room.DuctextensionRAK601canbeappliedtorightorleftof
the adapter. (Zoneline 5200, 5500 and 5800 Series not approved for
ducted application).
7-3/32"
6-1/2"