GE 2010 Air Conditioner User Manual


  Open as PDF
of 24
 
10
RAK201 (AZC and AZ Series*)
Access Plate Cover
TheRAK201accessplatecoverismadeofheavy-gaugesteelwith
multipleknockoutsforspecialapplications.Willadapttoservice
conduit.875"or1.125";circuitbreakerupto30ampor30amp
receptacle.TheRAK201fitsoldsub-basesRAK120,RAK121and
RAK122 for easy replacement of A-B series with AZC and AZ series.
RAK7022 (AZ Series*—2200, 2500, 2800, 2900, 3200,
3500, 3800, 3900, 4100 and 6100 only) Duct Transition
for Replacement of AZC with Rounded-Front AZ Chassis
TheRAK7022ducttransitionisdesignedtoallowductinstallationwherethe
original chassis was a slope-front discharge (AZC/AZR/AZ21/AZ31) chassis.
UsingtheRAK7022willallowtheexistingductadapterandextensionto
beusedwithoutrequiringtherelocationoftheholethroughthewalltothe
adjacent room.
* A-B Series: Zoneline units built before 1987 – Zoneline I, II, III, and IV; AZC Series: Zoneline units built from 1987 to 1992 – includes AZR Series – Zoneline 1000, 2000, 2500, 2700, 3000,
4000, 5000; AZ Series: Zoneline units built after 1992 – Zoneline 2100, 3100, 2600, 5100 / Zoneline 2200, 3200, 5200 / Zoneline 2500, 3500, 5500 / Zoneline 2800, 2900, 3800, 3900, 4100,
5800, 6100, 7500, 8500.
Zoneline
®
units
RAK702 (AZ Series*—2100 and 3100 only)
Duct Transition for Replacement of
AZC with Sloped-Front AZ Chassis
TheRAK702ducttransitionisdesignedtoallowductinstallationwhere
the original chassis was a slope-front discharge (AZC or AZR) chassis.
UsingtheRAK702willallowtheexistingductadapterandextensionto
beusedwithoutrequiringtherelocationoftheholethroughthewallto
the adjacent room.
RAK7012 (AZ Series*—2200, 2500, 3200, 3500,
2800, 2900, 3800 and 3900 only)
Duct Adapter for Replacement of
A-B with Rounded-Front AZ Chassis
TheRAK7012ductadapterisdesignedtolineupwiththeductextension
wheretheoriginalchassiswasaflat-topdischargeA-BSeries.Usingthe
RAK7012 will allow the existing duct extension to be used without
requiringtherelocationoftheholethroughthewalltotheadjacent
room.Dischargegrille,endplateandextensionmountinghardware
must be removed from old duct adapter and installed on the RAK7012.
8-3/8"
6-1/2"
 previous next