Filter
Top Products
6
USER INSTRUCTIONS
6.1
Place the flame baffle onto the burner and push up against
the rear tray lip, see diagram 4.
6.2 Locate the rear panel against the spacer brackets and slide
down so that it locates on the ledge of the flame baffle, see
diagram 5.
6.3 Locate the front coal between the heat shield and flame
baffle so that its ends sit flat against the burner skin, see
diagram 6.
6.4 Place five of the loose round coals on the front coal so that
they lean against the flame baffle, in between the fingers.
Place the two rectangular coals behind the round coals, one
at each side, see diagram 7.
6.5 Place four of the loose round coals behind the first row so
that they sit on the fingers, the two outer coals should touch
the rectangular coals, see diagram 8.
6.6 Place the remaining three round coals behind the centre
row so that they touch the back panel, see diagram 9.
Small Marlborough and Stockton 6
4
5
6
7
8
9
AR0359
AR0362
AR0363
AR0364
AR0360
AR0361