Filter
Top Products
15
6.8 Place the flame baffle onto the shelf at the rear of the tray
and push up against the rear ledge, see diagram 12.
6.9 Locate the front coal moulding in front of the flame baffle
ensuring that the end legs sit flat against the burner skin, see
diagram 13.
6.10 Place three large coals on the front coal so that they lean
against the flame baffle, and the four large coals on the
flame baffle so that they sit on the fingers, see diagram 14.
6.11 Place two small coals at each end of the front coal so that
they lean against the flame baffle, and a further two large
coals on the flame baffle, one at each end, see diagram 15.
6.12 Place five small coals along the rear of the flame baffle,
resting against the rear ledge, see diagram 16.
6.13
Ensure that the fibreglass seal on the back of the door is intact,
locate the door on the four studs and slide back to the firebox.
Secure in place using the four brass nuts and the tool
supplied, do not over tighten the nuts, see diagram 17. Keep
the tool with these instructions for future use.
NEVER OPERATE THE STOVE WHEN THE DOOR IS
REMOVED OR WHEN THE GLASS IS BROKEN.
INSTALLATION INSTRUCTIONS
INSTALLATION
13
16
14
15
17
AR0367
AR0368
AR0390
AR0369
Medium Marlborough and Stockton 8
12
AR0365
AR0366