Filter
Top Products
7. ARRANGEMENT OF FUEL BED
COMPONENTS
ADVICE ON HANDLING AND DISPOSAL OF FIRE CERAMICS
The fuel effect and side panels in this appliance are made from
Refractory Ceramic Fibre (RCF), a material which is commonly
used for this application.
Protective clothing is not required when handling these articles,
but we recommend you follow normal hygiene rules of not
smoking, eating or drinking in the work area and always wash your
hands before eating or drinking.
To ensure that the release of RCF fibres are kept to a minimum,
during installation and servicing a HEPA filtered vacuum is
recommended to remove any dust accumulated in and around the
appliance before and after working on it. When servicing the
appliance it is recommended that the replaced items are not
broken up, but are sealed within heavy duty polythene bags and
labelled as RCF waste.
RCF waste is classed as stable, non-reactive hazardous waste and
may be disposed of at a licensed landfill site.
Excessive exposure to these materials may cause temporary
irritation to eyes, skin and respiratory tract; wash hands thoroughly
after handling the material.
NOTE: CERAMIC PARTS ARE FRAGILE. ONLY USE THE SPECIAL
CERAMIC COALS SUPPLIED BY GAZCO - DO NOT USE REAL
COALS.
7.1 Position the flame baffle on the rear of the tray. See Diagram 3
arrow B.
7.2 Position the front coal, make sure it sits flat onto the burner
skin. See Diagram 3 arrow C.
3
AR2190
7.3 Place the coals following the appropriate Diagrams and
Instructions
5
USER INSTRUCTIONS
2
AR0416
5. UPGRADING YOUR FIRE
5.1 Your fire is fitted with a control valve that can easily be
upgraded to battery powered remote control. This upgrade
can be fitted by anyone capable of simple DIY jobs and
requires no special training. This upgrade can be obtained
through your local Gazco stockist.
5.2 STANDARD REMOTE CONTROL This remote control can
control the fire after the pilot has been lit. It can turn the main
burner on and regulate it from low through to high and back
again. It can turn the main burner off leaving the pilot burning
GAZCO PART NUMBER 8455.
5.3 IMPORTANT - there is a thermostatic version of the upgrade
but this is NOT SUITABLE for open flame fires like the VFC.
6. CLEANING THE FIRE
6.1 Remove the ceramic coals and place on a dry, clean
surface. Remove the front coal ceramic. Please handle with
care.
6.2 The ceramic parts should not require cleaning. Do not use a
vacuum cleaner or brush to clean these parts, any large pieces
of debris may be removed by hand.
6.3 Ensure any debris is removed from the burner ports.
6.4 Replace the ceramics by referring to Section 7.