Fujitsu AUU42RC Air Conditioner User Manual


 
En-9
DAY
WEEKLY
AUTO
ON
OFF
TIMER
MODE
SET
ZONE
START/STOP
CLOCK ADJUST
SET TIME TEMP./DAY FAN
CONTROL
MASTER
CONTROL
21
AUTO
DEFROST TEST
DAY OFF
ENERGY SAVE
PM
PM
TIMER
4
3
TIMER
MODE
SET
ZONE
START/STOP
CLOCK ADJUST
SET TIME TEMP./DAY FAN
CONTROL
MASTER
CONTROL
DAY OFF
ENERGY SAVE
PM
PM
TIMER
DAY
WEEKLY
ON
OFF
2
2
TIMER OPERATION (WEEKLY TIMER)
To Change Selected Time Settings
Press the START/STOP button to stop the air conditioner, and then proceed as fol-
lows.
1
Carry out steps 1 to 3 of the “Setting Up the Weekly
Timer Operation” procedure to select the day you want
to edit.
2
Press the SET button to select the time that you want
to change.
The selected setting flashes on the display. Each press moves you to the
next setting for the selected day, as follows.
WEEKLY 1 WEEKLY 1 WEEKLY 2 WEEKLY 2
ON OFF ON OFF
3
Press the SET TIME button to change the time setting.
4
Press the SET button.
The new setting overwrites the previous setting.
5
Once the setting has been canceled, hold down the SET
button for 3 seconds.
The WEEKLY display flashes briefly, and then the clock display appears.
Example: Changing the “WEEKLY 2”
ON setting for day 5 (Friday)
from 2:00p.m. to 3:30p.m.
NOTES:
In the following cases, cancel the set time prior to making the required amendments.
(1) If you want to change the ON time to a time that is later than the currently set OFF time.
(2) If the change would cause a temporary overlap between the first and second ON/OFF time spans.
Temporary overlap
ON OFF
ON
OFF
WEEKLY 1
WEEKLY 1
Change
Change
ON OFF
WEEKLY 1
ON OFF
WEEKLY 2
ON
OFF
WEEKLY 1 WEEKLY 2
Time
Time
Time
Time
ON OFF
sss
s