Filter
Top Products
Check
Filter
Sleep
FanFaster
FanSlower
Temp/Timer
Temp/Timer
Auto
Temp
Clean
Air
FanOnly
Cool
EnergySaver
Mode
On
Off
/
Remote
Sensing
Timer
Check
Filter
Sleep
FanFaster
FanSlower
Temp/Timer
Temp/Timer
Auto
Temp
Clean
Air
FanOnly
Cool
EnergySaver
Mode
On
Off
/
Remote
Sensing
Timer
9
Air Conditioner Features
(Continued)
REMOTE SENSING FEATURE (on some models):
DO THIS:
PRESS SENSING
START BUTTON
YOU WILL SEE:
LIGHT Pulsing
On&Off
Intermittently
Note: unit display shows
“Set” temperature
Note: remote display is
actual temperature at
remote control only
Note: This feature can be activated from the remote control .ONLY
To activate the remote sensing feature, point the remote control towards the unit and press the remote sensing
start button.
The LIGHT on the unit control will pulse to indicate it received the signal. The LIGHT on the remote control will
pulse each time it sends a signal. It will continue to send this signal until the feature is deactivated by pressing
the remote sensing stop button. If the unit does not receive the remote sensing signal during any 3 minute
interval, the unit will keep to indicate the remote sensing mode has ended. The display on the remote control
indicates the temperature at the remote . The unit display indicates the set temperature.ONLY
FAULT CODES
If the display reads “AS”, a sensor has
failed. Contact yourAuthorized
Frigidaire Service Center
YOU WILL SEE:
DO THIS:
PRESS ON/OFF
BUTTON
TO TURN UNIT OFF:
Check
Filter
Sleep
FanFaster
FanSlower
Temp/Timer
Temp/Timer
Auto
Temp
Clean
Air
FanOnly
Cool
EnergySaver
Mode
On
Off
/
Remote
Sensing
Timer
Check
Filter
Sleep
FanFaster
FanSlower
Temp/Timer
Temp/Timer
Auto
Temp
Clean
Air
FanOnly
Cool
EnergySaver
Mode
On
Off
/
Remote
Sensing
Timer