Filter
Top Products
Money
Fan
Set Hr.
Stop
Start
Temperature
Fan
Cool
On/Off
Cooler
Warmer
Only Speed Saver
®
Power
Timer Operation
4
To set the timer
NOTE: You can set the START and STOP times a minimum of one hour
apart, and amaximum of 23 hours apart.
9
TIMERSTART-Press
to view the current start time for cooling.
Start
Continue pressing the Start button until you arrive at the start time
you desire. Thestart time for coolingwill then beset.
10
TIMER STOP - Press the Stop button. Continue pressing the Stop
button until you arrive at the stop time you desire. The stop time for
cooling will thenbe set.
11
TIMER ON / OFF - Press the On/Off button to activate (light on) or
deactivate (light off) the timer. Once the on and off times have been
selected,theywillremaininmemoryandcycledaily untilchanged.
NOTE: If the unit is unplugged or the power is interrupted, the Set Hr.
function must be reset or the On/Off function will not work.
How to use the remote control
To start unit
1
POWER - Press the Power button once. The unit will automatically
start in themode and fan speedit was last left on.
To set mode of operation
2
COOL -Press theCool button toautomaticallyswitch theoperating
mode toCOOL.
3
FAN ONLY - Press the Fan Only button if you want to run the fan
only.
4
MoneySaver
®
- Press the MoneySaver
®
button to activate the
MoneySaver
®
feature.Thisfeature cyclesthefan withthe compres-
sor so that the fan does not run all the time.
To adjust temperature setting
5
WARMER - Press the Warmer button to raise the temperature
setting.
6
COOLER - Press the
Cooler button to lower the temperature
setting.
To adjust fan speed
7
FAN SPEED - Press the Fan Speed button to see the current set-
ting. Press again to change the fan speed. F1 isthe lowest setting
(SLEEP/ LOW),F2 isMEDIUM, F3is HIGH, andSF is theSMART
FAN setting.
To set the hour clock
8
SET HOUR CLOCK - Press Set Hr. once to see the current clock
setting. Continue pressing the button until you arrive at the current
time (Hour only). Minutes are not shown on the display. Make sure
that theA.M. / P.M. setting is correct.
8
10
7
11
9
43
12
56
Figure 4
How to operate your Friedrich room air conditioner (EQ08 model)
Function control
Theleftknob is asixposition controlthatallowsyou to selectheator coolin
eitherlow speedor high speed. Plus youcan select fan only ifyou wish.
Temperature control
o c , r e l o o c r o f e s i w k c o l c
r a w r o f e s i w k c o l c
Figure 5
AdditionalRC1wirelessremotecontrolscanbepurchasedfromyourFriedrichdealer.