www.fmiproducts.com
113084-01L8
INSTALLATION
IMPORTANT: Vent-free heaters add moisture
to the air. Although this is benecial, installing
heater in rooms without enough ventilation
air may cause mildew to form from too much
moisture. See Air for Combustion and Ventila-
tion, page 5.
Use only the correct type of gas (natural or
propane/LP). If your gas supply is not the
correct gas type, do not install heater. Call
dealer where you bought heater for proper
type heater.
-
WARNING: Maintain the
Carefully follow the instructions below. This
stove is a freestanding unit designed to set
directly on the oor. IMPORTANT: You must
maintain minimum wall and ceiling clearances
during installation. The minimum clearances
are shown in Figure 4, page 9. Measure from
outermost point of stove top.
A. Clearances from outermost point of stove
top to any combustible side wall should
not be less than 12".
B. Clearances from outermost point of stove
top to any combustible back wall should
not be less than 6" (includes corner instal-
lations).
C. Clearances from the stove top to the ceil-
ing should not be less than 48".
NOTICE: This heater is intended
-
-
-
WARNING: Never install the
heater
heater
CAUTION: This heater cre-
currents move heat to wall sur-
heater next to vinyl or cloth wall
-
the air exist, may discolor walls