FMI FEF26 Indoor Fireplace User Manual


 
PLUGGING IN THE HEATER(Refer to Fig.4):
METAL
COVER OF GROUNDED
OUTLET BOX
This heater is for use on 120 Volts. The heater has a 3-prong grounded plug (fig. A). If your electrical outlet has
only 2 slots (fig. B), you will have to use an adapter (fig. C) to convert from the 3-prong power cord to a 2-slot
receptacle. The green grounding plug extending from the adapter must be securely connected to a permanent
ground such as a properly grounded outlet box. The adapter should only be used if a proper 3-slot receptacle is not
available
.
NOTE: Adapters are not allowed for use in Canada.
A 15 AMP circuit is required to operate this appliance. If the breaker trips when the appliance is running, you may
need to move the appliance to another location or unplug other appliances that are on the same circuit.
INSTALLATION INSTRUCTIONS
Fig.4
6 1/2"
26 1/2"
21 7/8"
(D)
5