Filter
Top Products
ON/OFF
FLAME
HEAT
SETTING
POWER
ON/OFF
59
68
77
86
Grate (fold down to
reveal control panel)
OPERATING INSTRUCTIONS:
Read all instructions and warning prior to operating the appliance.
Ensure that all controls are in the “OFF” position before plugging the appliance in to a properly
grounded electrical outlet.
The control panel of the appliance is located behind the wire grate above the window on the front (Fig. 1).
Fig. 1
Fig. 2
Using the Control Panel and the Remote Control:
Simulated Flame Effect:
o
Push button (A) power ON/OFF.
o
Push button (D) to turn the flame ON/OFF.
o
Push button (E) to flame brightness.
Heat Setting:
o
Push button (C) once to activate low heat setting
o
Push button (C) second time to activate high heat setting
o
Push button (C) third time to activate the “AUTO” function.
Turn thermostat (B) dial to desired setting.
o
Push button (C) fourth time to shut heater off
26 3/8"
20 7/8"
26 3/8"
25"
7"
C
E
E
D
HEAT
SETTING
+
-
NOTE: Flame and/or heat can work separately or together.
4