Filter
Top Products
www.fmiproducts.com
124386-01A 11
FIREBRICK WALL INSTALLATION
IMPORTANT: Installation of brick
should be done after the re-
place is placed in a permanent
location.
1. The replace is shipped with the hearth
preinstalled. It is held in place for ship-
ping with 3 shipping brackets (Figure 19).
Remove these brackets before installing
any of the other rebrick walls.
Figure 19 - Removing Shipping Brackets
Shipping
Brackets
2. Install the left and right rebrick walls.
There is a bracket with 2 tabs on the
bottom of each rebrick wall. Angle the
wall into the replace opening and into
the slots on the side of the hearth (Figure
20), then tilt the top of the panel toward
the rebox surround.
Hearth
Right Face
Slot
Figure 20 - Slots for Firebrick Walls
3. Secure the rebrick wall using two of the
side retaining brackets provided. The
bracket will slip underneath the metal lip
on the top of the wall and screw into the
inner dome of the replace (Figure 21).
Figure 21 - Installing Side Walls
Retaining
Bracket
Right Wall
4. Install the bottom rear rebrick wall. Place
the wall face side down on the hearth with
the bottom of the wall toward the rear of
the rebox and the top toward the front
of the replace. Tilt the wall up toward
the back of the rebox. Secure bracket at
top of the rebrick wall to the rear rebox
surround (Figure 22).
Leading
Bricks
Figure 22 - Installing Bottom Rear Wall
Top
Bracket