First Alert FA130CP Home Security System User Manual


 
5
6\VWHP2YHUYLHZ
,QWURGXFWLRQ
Congratulations on your ownership of the First Alert Professional Security System.
You've made a wise decision in choosing it, for it represents the latest in security
protection technology today. This system provides:
Three forms of protection: burglary, fire* and emergency
At least one keypad which provides control of system and displays system status
Various sensors for perimeter and interior burglary protection
Smoke or combustion detectors* designed to provide early warning in case of fire.
Your system may also have been programmed to automatically send alarm or status
messages over the phone lines to a Central Monitoring Station.
* Commercial installations and some residential systems may not include fire
protection – check with your installer.
6\VWHP%DVLFV
Burglary Protection
Several modes of burglary protection: Stay, Night-Stay, Away, Instant, Maximum.
STAY: arms perimeter zones only and entry delay is on
INSTANT: same as STAY, except entry delay is off
NIGHT-STAY: arms perimeter zones and selected interior zones; entry delay on
AWAY: arms perimeter and all interior zones, entry delay is on
MAXIMUM: same as AWAY, except entry delay is off
You can BYPASS selected zones while leaving the rest of the system armed.
CHIME mode alerts you to the opening of protected doors and windows while the
system is disarmed.
Fire Protection
Fire protection is always active (if installed) and an alarm sounds if a fire
condition is detected
If necessary, you can manually initiate a fire alarm using the keypad (if
programmed).
Refer to the Fire Alarm System section for information regarding fire protection,
smoke detectors and planning emergency exit routes.
Security Codes
You were assigned a 4-digit security code during system installation.
Use your security code when arming and disarming the system, and when
performing other system functions.
Other users can be assigned different security codes, each with different
authority levels, which define the system functions a particular user can perform.