Filter
Top Products
– 57 –
Fire Alarm System
General
Your fire alarm system (if installed) is on 24 hours a day, providing
continuous protection. In the event of an emergency, the installed
smoke and heat detectors will automatically send signals to your
Control/Communicator, triggering a loud interrupting sound from the
keypad. An interrupted sound will also be produced by optional
exterior sounders. A FIRE message will appear at your keypad and
remain on until you silence the alarm.
In Case Of Fire Alarm
1.
Should you become aware of a fire emergency before your
detectors sense the problem, go to your nearest keypad and
manually initiate an alarm by pressing the panic key assigned as
FIRE emergency (if programmed by the installer) and hold down
for at least 2 seconds.
2.
Evacuate all occupants from the premises.
3.
If flames and/or smoke are present, leave the premises and notify
your local Fire Department immediately.
4.
If no flames or smoke are apparent, investigate the cause of the
alarm. The zone descriptor of the zone(s) in an alarm condition
will appear at the keypad.
Silencing A Fire Alarm
1.
Silence the alarm by entering your code and pressing the
OFF
key. To clear the display, enter your code and press the
OFF
key
again