Filter
Top Products
– 43 –
Access Door Control
General Information
Your system may be set up such that a locked access door (such as in
a lobby) can be unlocked momentarily or for a specific period of time,
using a keypad command Ask your installer if this has been done in
our system.
Executing
There are three entries that can be entered at the keypad to activate
this command:
1.
Enter your security code + [0].
The door will unlock for 2 seconds.
2.
Enter your security code + [#] + 73, or security code + [#] + 74.
The door will unlock for a specific period of time.
3.
Enter your security code + [#] + 75 + access point + function. The
functions available are Grant, Protect and Bypass. Grant will
temporarily unlock a door to allow an access. Protect will cause a
door to unlock only when a valid access is received. Bypass will
cause a door to be permanently unlocked to allow continuous
access.