Filter
Top Products
4. Place the new lters in the main unit.
(Carbon Filter should always be
inserted rst, then the True HEPA lter
into drawer.)
5. To reset the lter light once a new True
HEPA and/or Carbon Filter is installed:
a. Be sure that drawer is closed.
b. Turn on the unit.
c. Locate the lter replacement icon on
the display panel.
d. Press and hold the lter replacement
icon for 3 seconds until unit beeps.
HEPA Filter icon will ash amber.
Press lter icon area to alternate
between HEPA and Carbon.
e. Once desired lter is illuminated, press
and hold for 3-5 seconds. A short beep
will be heard and the light should turn
off. Repeat process for each lter as
needed.
10