Filter
Top Products
5
PREP ARA TIONS BEFORE USE
W IN DI NG T HE P OW ER C OR D
1
Wind the power cord around
the
cord storage hooks.
Secure the power
cord plug on the
power cord.
Cord Storage
Hooks
T H E R MA L S A F E T Y D E V IC E I N M A IN B O D Y
To protect your vacuum cleaner motor from overheating, a thermal safety device has been
built
in. If your vacuum cleaner hose or air intake clogs up with dust or dirt, or if your dust
bag
becomes full and you continue to run the machine, the vacuum will shut off
automatically
to prevent the motor from overheating. If this happens, turn off slide switch
and
disconnect your vacuum from power outlet, remove the material clogging the machine
and
let your vacuum cool down for approximately 45 minutes. You can then restart your
vacuum
cleaner and use it again.
R E L E A S IN G T H E P O W E R C O R D
1
2
Rotate the upper cord
sto
rage hook
do
wnward.
Return the hook to the
upright
position before
attempting
to rewind
the power cord.
Upper Cord
Stor
age Hook
WARNING: This appliance is equipped with a
grounded-type 3-wire cord (3-prong plug). This plug
will only fit into an electrical outlet made for a 3-prong
plug. This is a safety feature. If the plug should fail to
fit the outlet, contact an electrician to replace the outlet.
Do not attempt to defeat the safety purpose of the
grounding pin, part of the 3-prong plug.
INSERTING THE POWER CORD PLUG