Filter
Top Products
16
1
1
REPLACEMENT INSTRUCTIONS
REMOVING THE BOTTOM PLATE
Set the vacuum cleaner to the
parallel position and turn it over.
REATTACHING THE BOTTOM PLATE
Insert the projection on the bottom plate
into the groove on the nozzle housing
and set the bottom plate in place.
3
Turn the vacuum over and place in the upright position.
Bottom Plate
Projection
Groove
2
2
Loosen
Screw
Using a Philips screwdriver, loosen
the screw on the bottom plate.
Lift the bottom plate off.
Re-tighten the screw using a Philips
screwdriver.
3
Tighten
Screw