Filter
Top Products
Pet Hair Attachment
USING THE ATTACHMENTS
Assemble the attachments on the suction hose A or B.
Assemble the accessories as shown below
9
Caution: When using one of the attachments during cleaning,set the vacuum
cleaner to the upright position.
Suction Hose A
Wand
Suction Hose B
Handle
Caution:
Before using the suction hose B,
please make sure the handle is
reattached on the body.
Adapter
Pet Hair
Attachment
Twist pet hair attachment cuff until it locks
1
Press the release button C to disconnect the handle from the vacuum cleaner.
To attach the Pet Hair Attachment, twist the cuff on end of attachment onto the adapter
until it locks, then slide adapter into wand or into Suction Hose B.
To remove the Pet Hair Attachment, twist the cuff on end of attachment and pull to
release.
2
3
WARNING:
Do NOT use Pet Hair Attachment on animals, this attachement
is intended for household cleaning only.
Hose Attachment
Hose Cuff
Suction Inlet
Suction Hose A
Handle
Line up notches
push hose in till it
clicks.