Filter
Top Products
If there is a problem with the vacuum cleaner, carry out the following checks
to find the cause. If the problem still persists after the checks have been made,
do not use the vacuum cleaner to prevent the possibility of an accident occurring.
Turn the ON/OFF switch to the "OFF" position, disconnect the power cord from the
wall outlet, and contact FANTOM Customer Service at 1(800) 275-9251.
Or visit our website at www.fantom.com
TROUBLESHOOTING
Problem Cause R emedy
The motor does not operate
when the ON/OFF switch is
set to the "ON" position.
Suction force is weak.
The agitator does not
operate.
The power cord plug is not
securely inserted into the
wall outlet.
Insert the power cord plug
securely into the wall
outlet.(refer to page 5)
The dust compartment is full.
The suction hose is blocked.
The filters are dirty.
The nozzle head is blocked.
Empty the dust compartment.
(refer to page )
10
Remove the blockage.
(refer to page 12)
Clean the filters.
(refer to page 11)
Remove the blockage.
(refer to page 12)
The nozzle air inlet pipe is
blocked.
Remove the blockage.
(refer to page 12)
TO ORDER REPLACEMENT FILTERS CALL 1(800) 275-9251
The bypass vavle is opened.
The flat belt is worn or
broken.
Replace the flat belt.
(refer to page 13)
Remove the blockage.
(refer to page 12)
(refer to page 15)
9BF-D-P111-04200 0604-
E
17