Filter
Top Products
- 15 -
1. Loosen the zoom ring knob, and then turn the ring towards <W> or <T> as necessary to obtain the
desired view angle.
W side (Zoom out)
The viewing range will be wider and the subject is smaller.
T side (Zoom in)
The viewing range will be smaller and the subject is larger.
2. Loosen the focus ring knob, then turn the ring towards <∞> or <N> as necessary to obtain a clear
video image.
3. Repeat steps 1 and 2 until the best image is obtained. Once the lens setting is complete, tighten
the zoom and focus ring knobs.
3.2.3 Camera Setting
3.2.3.1 OSD User Setup Menu
This camera utilizes an On Screen Display (OSD) user setup menu.
Please refer to Chapter 3 OSD Menu & Configuration, to get more details about OSD menu usage.
3.2.4 Close the Camera Cover (after installation is complete)
The EHH5200 is specially designed with one inner cover and one outer cover ring for water-proofing
and ease of installation. Please follow these instructions for closing the camera cover.
1. Align the window in the cover with the lens
2. Push the interior cover toward the base, until it completely covers the whole red gasket and is lined
up parallel with camera base. (The cover must be aligned with the camera base or it cannot be
closed. Then turn the outer cover ring clockwise to secure it tightly to the camera base.
Push the inner cover and
cover the whole red gasket
Outer cover ring