EverFocus EHH5200 Home Security System User Manual


 
- 9 -
When installing the camera, you can use this video connector to connect a portable monitor. This will
allow you to easily adjust camera’s field of view and focus.
(6) OSD Menu joystick: Use the joystick to move the cursor Upwards/Downwards. This is used to
select the item to be set.
Tilt the stick to the right or left. This is used to select or adjust the parameters of the selected item.
Press in on the stick to enter the setup menu. If the item has its own setting menu (sign ), press
the stick again to display the sub- menu.
(7) Power & HDcctv Video pigtail cable
Connect power and HDcctv video to pigtail cable
2.3 Related Products
In addition, you may order the following EverFocus products which are recommended for use with the
camera to achieve the best performance:
L Type Bracket: BA-EDMS
EN220 5.6 inch LCD Test Monitor
3. INSTALLATION
This chapter will describe, in general terms, how to install the EHH5200 camera.
STEPS:
3.1. Mounting Camera:
1. Drill the Holes. See 3.1.1
2. Mounting: See 3.1.2
3.2. Adjusting Camera:
1. Adjust the camera position. See 3.2.1
2. Adjusting Zoom and Focus See 3.2.2
3. Camera Setting. See 3.2.3
4. How to close camera cover after installation. See 3.2.4
Warning
To prevent electrical shock, turn off the electrical power before making electrical connections.