Filter
Top Products
3
www.sharkclean.com
IMPORTANT: Always make sure the mop
is UNPLUGGED from the wall when not in
use. Never fill the mop, attach the mop head,
or change or remove the Sonic Lift
™
cleaning
pad when the mop is plugged into the wall. To
prolong the life of your Shark
®
Sonic Steam
Pocket
™
Mop, we recommend using distilled
water. Make sure you only add water to the
tank. The addition of chemicals or cleaning
solutions may damage the appliance and could
be unsafe for you and your family.
ASSEMBLE
1 Insert the mop handle into the main body of the
steam mop (into the tube that leads to the tank).
Push the mop handle and main body of the
steam mop together until you hear it “click” into
place. (Fig. 1)
2 Fit one side of the Sonic Lift
™
cleaning pad onto
the head first, making sure that the scrubbing
side is facing down, then using the lavender loop,
pull the pocket over the head. Attach the hook
and loop quick fasteners on the top of the pocket
to secure in place. (Fig. 2)
3 Snap the mop head into the mop body by lining
up the groove on the back of the mop body with
the groove on the back of the mop head. Push
until you hear it “click” into place. (Fig. 3)
fig. 3
fig. 1
fig. 2
The Sonic Lift
™
cleaning pad has two different
cleaning sides. One side has nylon scrubbers to
break up tough stains and the other side is a shaggy
cleaning pad to lift up and lock away dirt and debris.
SM200_11_IB_ENG_120608_1.indd 3 12-06-08 4:12 PM