Euro-Pro SC618HZ Carpet Cleaner User Manual


 
ADDITIONAL IMPORTANT SAFEGUARDS
2
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
1. To avoid circuit overload, do not operate another appliance on the same socket
(circuit)
2. If an extension cord is absolutely necessary, a 15 ampere 14 gage grounded
cord should be used. Cords rated for less amperage may overheat. Care should
be taken to arrange cord so that it cannot be pulled, tripped over or pinched.
3. Do not leave unattended when the system is connected to a power
supply/electrical outlet.
WARNING: This appliance is equipped with a grounded-type 3-wire
cord (3-prong plug). This plug will only fit into an electrical
outlet made for a 3-prong plug. This is a safety feature. If
the plug should fail to fit the outlet, contact an electrician
to replace the outlet. Do not attempt to defeat the safety
purpose of the grounding pin, part of the 3-prong plug.
CAUTION: The force and heat of the steam may adversely affect certain
materials. Always check the suitability of using the steam
cleaner on a surface by carrying out a preliminary test on a
hidden area.
Examples for guidance only:- Varnished wood or glossy leather can
be bleached by the effects of steam.
- Shiny plastic materials risk being tarnished.
- Acrylic, velvets and linen are very sensitive to the
temperature of steam.
The manufacturer accepts no responsibility for damage caused to objects,
materials, animals or persons due to the inappropriate use of steam, and through
ignoring the advice and recommendations set down in the Owner's Manual.
7
Hints
The steam cleaner has many uses many of
which will not be mentioned in this owner's
manual. This is meant only to give you a
general idea of what can be achieved with
the unit. However, the ways in which to use
the units and the brushes are in most cases
universal. It is most helpful to always have a
micro fiber cloth, a terry cloth towel or paper
towel ready to use for removal of moisture
and residue. 100% white cotton towels work
best.
You can clean the brushes with your steam
cleaner. When cleaning the brushes, use a
pair of pliers to hold the brushes or place in
the basket of your dishwasher.
Note: Wipe immediately before the cleaned
area dries.
Window, Glass Surfaces and Mirrors
Use the squeegee. Work with the vapor jet
using top to bottom movements. Use the
squeegee to clear the water from the glass.
To do this without leaving streaks, use lateral
movements from the top to the bottom of the
surface. Do not use on cold glass.
CAUTION: When cleaning windows, always
avoid any sudden changes in temperature to
prevent glass breakage or cracks.
Fiberglass or Stainless Steel Surfaces
Use the nylon detail brush. Slowly move the
brush over the surface to be cleaned. The
vapor will emulsify the dirt and grease on the
surface. Follow behind with the cloth towel
over the brush to remove excess moisture
and residue.
Tip: An old idea for polishing stainless steel
is to wipe it down with seltzer soda water
after it is cleaned.
Blinds
Use the nylon detail brush to clean blinds.
Move the brush over the surface, allowing
enough time for the vapor to penetrate.
Work quickly on PVC blinds. Test for color
fastness on fabric blinds before using.
Bathroom Areas
To clean the bathtub or shower area, use the
nylon detail brush for grout, shower door
tracks, hard to get areas and heavily soiled
areas. The squeegee will be the most
efficient way to clean the rest of the area.
Allow plenty of time for the heat to penetrate
the surface. This is especially helpful in the
shower area if there is tile or grout.
USAGE SUGGESTIONS FOR STEAM CLEANER
To clean sanitary fixtures, use concentrator
nozzle with or without nylon bristle brush.
Use a towel to wipe up excess moisture and
residue.
To clean the sink and faucets, use nylon
detail brush.
Soap Scum
Soap scum dissolves almost immediately
under a combination of heat and moisture.
Rinse the surface with a small amount of
water afterwards or go back over it once
more with a cloth towel.
Moving too slowly can dry out the soap scum
and cause it to granulate on the surface. The
surface will have a gritty feel. If this happens,
apply vapor to the surface with the nylon
bristle brush again and re-clean.
Note: Soap scum sometimes will develop a
hard surface from waterborne minerals. If
this is the case, use the nylon detail brush to
break up this surface - or spray or wipe first
with lemon, vinegar or seltzer soda water to
soften the minerals.
Refrigerator
Use the concentrator nozzle alone to blow
away dirt in the ice machine and on door
seals. The vapor will not dry out or crack the
seals as chemicals often do. Can openers
and other kitchen equipment can be easily
cleaned with the nylon detail brush on the
concentrator nozzle to get into all the nooks
and crannies.
To clean microwaves
or other small
appliances use the nylon detail brush for
small areas. Do not inject steam into the vent
openings of the product.
CAUTION: When cleaning small electrical
appliances always unplug them from outlet
before cleaning.
Exterior Areas
For detailing the wheels, use the concentrator
nozzle and the nylon detail brush.
To clean bicycles, use the nylon detail brush.
To clean tools or equipment , use the nylon
detail brush, depending on the surface area.
To clean BBQ’s, use the nylon detail brush to
clean the BBQ rack.
Garden Furniture
Use the nylon detail brushes on the surface
area. Work quickly when cleaning resin
outdoor furniture.