Tips On How To Use Your System
Water
• Use tap water for all your cleaning needs.
• However, if you live in an area with hard water, it is recommended that you use demineralized/distilled
water and especially when cleaning light colored fabrics to eliminate the possibility of hard water
stains.
Temperature
• The vapor temperature at the tip of the nozzles is between 220°F and 240 °F.
• The temperature of the vapor falls to 100 °F at a distance of 10 inches from the nozzle.
Warning: A towel wrapped around the brush can become hot enough to
burn. Make sure that you let
the towel cool off before touching it.
Adjusting Steam Pressure (with knob #8)
• Start cleaning with low steam pressure.
• Increase the steam pressure only if the surface being cleaned requires it.
• Using steam on low
or medium setting will extend the time you can use you unit before refilling it with
water.
Using Towels
• For best results use 100% cotton white terry cloth towels.
• Use correct size of towel (8” x 17”) to allow you to wrap the towel around the brush and clip it under
the spring loaded cloth holder.
• The purpose of using a towel is to absorb moisture and dirt being cleaned. Use always dry towels. A
wet towel will smear the dirt.
• Wash towels with strong detergent and bleach.
• Using scented fabric softener while washing the towels will cause the scent to be released into the air
when using the towels with your steam system.
Efficient Work
• Wipe always from the top down on vertical surfaces, in this way the dirty drops will not dirty surfaces
already cleaned.
• Avoid changing brushes back and forth while cleaning.
• Start with the smallest brush to clean tight spots and corners first.
• Wipe dirt as soon as possible, otherwise it will dry and stick to the surface.
10