Filter
Top Products
HOW TO USE
Power Switch
1. Push the power switch down to turn on; push up to turn off.
2. Select type of cleaning. Carpet cleaning starts the brush roll turning. Bare floor cleaning
stops the brush roll.
Nozzle with Edge Kleener
®
The nozzle turns down for regular or
low profile cleaning. Airflow under
the nozzle automatically directs
suction to the edges and corners for
maximum full width cleaning.
HOW TO MAINTAIN
The instructions given in this booklet serve as a guide to routine maintenance. Keep the
cleaner operating at top efficiency. Empty the dust cup after each use.
Empty Dust Cup
7
1. Slide dust cup
latch up.
2. Pull dust cup
from handle
section and lift
from the nozzle.
4. To replace dust cup, fit
dust cup down into
nozzle.
5. Gently squeeze the
sections together until
the dust cup latch locks
the cup in place.
3. Pull the filter out of the
dust cup, shake
contents of dust cup into
a waste container. (To
clean dust cup filter refer
to dust cup filter
section.)
Dust Cup
Latch
Dual Uses
To operate as a
handvac remove
the handle by
releasing the lock
button.
Off
Floors
Carpets
To operate as a stick vac
attach the handle.
Lock
Button