Filter
Top Products
ENGLISH
5
1) Lower handle to floor (Fig.1).
2) Unscrew the lens and remove old
bulb. Replace with bulb rated 12 v.,
10 w., Type 904.
3) Push in new bulb, replace lens
cover and replace screw (Fig. 2).
Change Light Bulb
Make sure vacuum is turned off and power cord is unplugged.
!
Hose
1) Remove hose end from duster
chamber (Fig. 3). Flex the hose
to help loosen any blockage.
Hose Connector
1) Unclip sides and clear blockage
in opening and hose (Fig. 4).
2) Clip back into place and
reconnect hose at both ends.
Base Hose
1) Remove 6 screws and brush roll
cover (Fig 5).
2) Clear blockage from base hose
(Fig. 6). Check for debris in brush
roll and clean if needed.
3) Replace 6 screws and
brush roll cover.
!
How to Clear a Blockage
Make sure vacuum is turned off and power cord is unplugged.
Fig. 1
Fig. 3
Fig. 5
Fig. 4
Fig. 6
Fig. 2
Eureka Customer Service HELPLINE 1-800-282-2886
www.eureka.com