Filter
Top Products
15
To remove HEPA
cartridge
filters
1. Push down latch and pull filter cassette back.
2. Then lift filter up and remove.
To replace HEPA
cartridge
filters
1. Place bottom tabs of filter cassette into slots.
2. Rotate filter toward cleaner.
3. Push upward on the latch to secure into place.
NOTE: To have the benefit of a sealed HEPA system,
you must use one of the HEPA
cartridge
filter
systems.
To remove filters from
filter frame
.
1. Push down latch and pull filter frame back.
2. Then lift filter up and out of filter frame.
To replace filters into
filter frame
.
1. Place new filter in filter frame. Place bottom tabs
of filter frame into slots.
2. Rotate filter frame toward cleaner.
3. Push upward on the latch to secure into place.
HEPA Cartridge Filters (Only for models
with HEPA cartridge .)
Check the HEPA filters with each disposable dust bag
change. Replace twice a year or after every six bag
changes.
Filters in Filter Frame
(Only for models with filter frame)
Check the filter each time dust cup is emptied or as
needed. Replace twice a year as needed.
Latch
Tabs
Filter Cartridge
(One complete unit)
Filter Frame plus
filter (depending
on your vacuum
model)
Filter
Filter
Frame
Motor Filter
Check the motor filter with each disposable dust bag
change. Clean or replace as needed.
To Clean Motor Filter
1. Remove filter from inside bag compartment, lower
left side.
2. Shake filter to remove excess dust. If necessary, the
filter can be cleaned by vacuuming with another
cleaner.
3. Reinstall filter with stiff/printed side down. Slide
under back ledge and filter retainer. Install with
colored/smooth side down.
Back Ledge
3
Filter Retainer
3
31 and