Filter
Top Products
11
HOW TO MAINTAIN
The instructions in this booklet serve as a guide to routine maintenance. To avoid unnecessary service calls, check the
cyclonic cassette, belt, and brush roll often.
Check and clean the Cassette Micron Filter once a month to maintain good performance. The filter can be cleaned
by vacuuming with another cleaner or brushing dust off into the trash. Recommended changing of the Cassette
Micron Filter is once every three months.
Remove cyclonic cassette by pushing up lever (1), unhooking
(2) by swinging outward from vacuum body. When replacing
cyclonic cassette, hook at top where shown (2), and swing
back into place until lever (1) snaps into place.
2
1
To Change Cassette Micron Filter:
NOTE: Turn off the switch and unplug the electrical cord before changing the Cassette Micron Filter. Never operate
the vacuum cleaner without the cyclonic cassette or the filter.
|
1. Remove the filter frame by grasping the handle on the back of the filter frame and pulling firmly. The filter frame will drop
down staying connected at the hinges on the bottom.
2. Remove old filter from filter frame and replace with a new filter.
3. Reconnect filter frame to cassette body by swinging filter frame up and pushing against cassette body until it snaps into
place.
To Change the Cassette Micron Filter:
1
2
3
1. Filter Frame
2. Filter
3. Cassette Body
Use GENUINE EUREKA replacement
filter, 28115A. Look for the GENUINE
EUREKA product symbol.
|
|
|
|
|