Open as PDF
How To Use Accessories
1. To remove the hand vac from the base, push in on
the hand vac release button, and tilt hand vac out of
base as shown above.
2. The crevice tool is stored in the base behind the hand vac (see
g. 1). Pull crevice tool away from the base and put the wide
end into the end of the hand vac nozzle. (See above) The
crevice tool is used to clean corners, baseboards, between
3. To use as a stair vac, collapse handle. Push in on
the handle release button and push handle down
into unit. See below.
CAUTION: Use extra care when cleaning on stairs.