Filter
Top Products
Secondary Installation
Right Log
Figure 39: Shows the back log plus the two
(2) small log twigs. Put the large back log
in rst, making sure the locator pins line up
with the cutout sections on the log. There
are two (2) pins with ledges and a single
ledge on the back log. The back log sits on
two (2) supports attached at the rear of the
rebox. The two (2) small twigs are placed
under the grate and they should be rotated
so they cover up the least number of small
burner ports.
Figure 40: Shows the left/center log in
place. The left/center log is placed on the
other two (2) pins connected to the burner
pan and the straight part rests on the grate
connecting the andirons. There are notches
on the bottom of the left/center log to help
position the log correctly.
Figure 41: The right log rests on the right
pin and ledge of the back log and the oor of
the rebox.
Figure 39: First Stage Log Set Installation.
Figure 40: Second Stage Log Set Installation.
Back Log
Pegs and
ledges
Two small twigs
Left/Center
Log
Figure 41: Third Stage Log Set Installation.
30