Filter
Top Products
Page 12 14008-0-0403
PLACEMENT OF GLOWING EMBERS AND LAVA ROCK
Placement of the glowing embers (rock wool) is very individual
and light coverage of the areas indicated will provide your best
effects. We recommend separation of the rock wool by hand and
make your coverage as light and fluffy as possible.
Place just enough embers on the burner to obtain the glow and a
gold, yellow flame.
Do not place embers (rock wool) over large ports in rear portion
of burner.
A thin layer of glowing embers (rock wool) should be placed
under open space between the right and left middle logs.
PROPER INSTALLATION SEQUENCE:
VFSR and VFSV-(16, 18, 24, 30)C (Figure 12)
1. Place two (2) log grates onto two (2) left, front pins and two
(2) right, front pins on burner pan.Secure grates with two (2)
Tinnerman clips.
Attention: Log grates, lava rock and rock wool will not be
used with Flame Art log sets.
LOG GRATE PLACEMENT
Figure 12
Rock wool should not be placed in the area of the pilot assembly.
Placing Lava Rock in Front of Grate and Burner Pan on Fire-
place Floor
Spread lava rocks on fireplace floor in front of grate and burner
pan. The lava rocks are for decorative effect and are not required
for fireplace operation.
ATTENTION: DO NOT PLACE LAVA ROCKS ON LOGS
OR ROCK WOOL. THE LAVA ROCKS SHOULD ONLY
BE PLACED ON THE FIREPLACE FLOOR.