Filter
Top Products
www.enviromaster.com
WLCA/WLHA High Wall Evaporator
14
WLCA/WLHA HIGH WALL EVAPORATOR INSTALLATION INSTRUCTIONS
REASSEMBLING THE WLCA/WLHA CABINET
When satised that the system is leak free reinstall the bottom and left end cap in the precise
order shown below:
1. Replace the bottom panal.
2. Fasten the right end
cap side rst with the
Philips-head screw.
3. Next replace and
tighten the re-
maining screws
across the bot-
tom panel.
4. Replace left
left end cap.
Ensure seam is tight.
5. Once end cap is
properly seated
tighten the screw
as shown above.
6. Thighten bottom
end cap screw.
7. Replace the grille,
ensure it’s seated
properly on the
unit.
8. Tighten the top
scew on the left
end cap.