Filter
Top Products
3
Unpacking Instructions
1. Check to see that you have received the following
parts:
NOTE: If you are uncertain of part description,
refer to exploded view illustration.
a. Fan motor assembly
b. One ceiling cover
c. One coupling cover
d. Five fan blades
e. Five fan blades flanges
f. Five blade medallions
g. One lower housing
h. One light kit assembly including one finial nut
i. One lower glass
j. Two 50-watt mini candelabra halogen light bulbs
k. One hanger bracket
l. One hanger ball/4.5” downrod assembly
m. One receiver and 4-speed hand control
n. One loose parts bag containing:
1. One clevis pin
2. One hairpin clip
3. Three 12 ga. wire connectors
4. Two #8-32 x 1-1/4” threaded studs
5. Two #8 external tooth lockwashers
6. Two #8-32 knurled knobs
7. Sixteen #10-32 x 12.3mm washer head screws
8. Eleven 1/4” x 1/2” round head lock tie flange screws
9. One #8-32 x 10mm pan head screw
10. One balancing kit
This Manual Is Designed to Make it as Easy as Possible for You to Assemble,
Install, Operate and Maintain Your Ceiling Fan
Tools Needed for Assembly
One Phillips head screwdriver One stepladder
One 1/4” blade screwdriver One wire stripper
MATERIALS
Wiring outlet box and box connectors must be of
type required by the local code. The minimum wire
would be a 3-conductor (2-wire with ground) of the
following size:
Installed Wire Length Wire Size A.W.G.
Up to 50 ft. 14
50-100 ft. 12
Before assembly your ceiling fan, refer to section
on proper method of wiring your fan (page 8).
If you feel you do not have enough wiring
knowledge or experience, have your fan installed
by a licensed electrician.
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
1-800-654-3545
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal
injury or property damage.
H. LIGHT KIT
ASSEMBLY
D. FAN
BLADES
G. LOWER
HOUSING
E. FAN
BLADE
FLANGES
F. FLANGE
MEDALLIONS
B. CEILING
COVER
I. LOWER
GLASS
J. LIGHT
BULBS
M. FAN/LIGHT
REMOTE
CONTROL/
RECEIVER
L. HANGER BALL/
4.5" DOWNROD
ASSEMBLY
K. HANGER
BRACKET
N. LOOSE
PARTS BAG
A. FAN MOTOR
ASSEMBLY
C. COUPLING
COVER
WARNING
!
WARNING
!
WARNING
!
NOTE: Place the parts from the loose parts bags
in a small container to keep them from being lost.
If any parts are missing, contact your local
retailer or catalog outlet for replacement before
proceeding.
2. Remove the fan motor assembly from the
protective plastic bag. Place all carton contents on
a protective surface.
Model No.: CF990